Kato 35T truck crane NK350E

Maximum weight

35000kg @ 3.5m

Boom 
section 
length 
stretched out speed 
luffing speed

4 edge shape

4 sections
10 - 32.2m 
104s 
from -2 to 80°within 52s

jib
section
length

Lattice type

1 section, 8m

Arm-side single pulley 
length

0.7m (inclination: 18 °)

Main hoisting mechanism 

to allow pull the 

the largest single rope speed

Rope

Axial piston hydraulic motor through reducer drive, rolls cast on anti-ropes, and auxiliary lifting bodies separately controlled. 
30.7kN 
118m/min, the fourth layer of 
175m ×Φ16mm

Auxiliary winch 

single rope to allow the tension of 
the largest single rope speed 
rope

By axial piston hydraulic motor through reducer drive, rolls, cast anti-ropes, with the main lifting mechanism separate control. 
34.3kN 
102m/min in the second layer

90m×Φ16mm

Rotary 

Rotary speed

Tail swing radius

360 ° continuous rotation, axial piston hydraulic motor through a planetary gear reducer drive. 
2.5r/min

3.22m

Leg

Horizontal span of outrigger 

Hydraulically operated, box-type structure, H, power lifting, stretching, equipped with pilot-operated check valve, the level and the lift cylinder can be operated simultaneously, can also be a separate operation.

Stretch out 6.1m, to the middle 4.0m

outrigger vertical span

5.1m

Front outrigger

Article hydraulic outrigger is mounted in the frame in front of, enable the crane lifting operation in the range of 360 °.

The hydraulic system 
hydraulic pump 
control valve 
Hydraulic tank capacity 
oil filter

Four gear pump 
pilot pressure to control the multi-way control valve 
467L 

return filter

Safety devices

AML (torque limiter), pilot-operated check valve · pressure relief valve, balancing valve · overwinding indicator